Concrete Patio Cost in San Antonio, TX
Homeowner estimates · Updated 2026-03-30
Homeowners in San Antonio, TX typically pay $4.59–$8.05 per sq ft for concrete patio installation. A typical residential patio (200–400 sq ft) runs $918–$3,220 total. Pricing is estimated from 26 TxDOT Bid Item Average Cost Dashboard bid contracts, adjusted for residential market rates.
San Antonio's intense sun and low humidity mean patios lose surface moisture faster than almost any other market — curing compound applied immediately after strike-off and shade protection for the first 24 hours are worth the modest add-on cost in summer. At $4.59–$8.05/SF, San Antonio is one of the most affordable markets for concrete patio in this dataset — ranking 5th of 30 tracked metros, below the dataset median of $6.51/SF.
San Antonio sits on the western edge of the Texas Hill Country with a mix of caliche limestone and expansive black clay depending on neighborhood — site prep costs vary significantly by parcel, and asking your contractor for a subgrade assessment before bidding is worthwhile. Costs rise with decorative finishes — stamped concrete, exposed aggregate, or acid-stained surfaces typically add $3–8/sq ft over a plain pour. Site access, drainage slope, and any existing hardscape removal all factor into your final quote. San Antonio's concrete market runs 5–10% below the statewide average due to lower labor costs and strong regional aggregate supply; spring and fall are peak seasons with 3–6 week lead times.
Typical Homeowner Cost
Low
$4.59
per sq ft
Mid
$6
per sq ft
High
$8.05
per sq ft
How this estimate is built ▾
Step 1 — DOT bid data
26 TxDOT Bid Item Average Cost Dashboard bid contracts (2024–25) → p25/p75 installed $/sq ft at prevailing wage rates.
Step 2 — Residential adjustment
TX has no state prevailing wage law — TxDOT Bid Item Average Cost Dashboard bids use open-shop wages (BLS $22.88/hr). Residential estimate applies a 27% commercial overhead discount.
Step 3 — Local indices
Labor index: 14% below national (BLS OES, cement masons). Material index: national average (USGS aggregate prices).
Step 4 — Project type
Patio complexity multiplier: 0.95×–1.25× applied to base flatwork rate.
Contractor / Professional Rate(government & commercial projects)▾
Low
$6.29
per sq ft
Mid
$9
per sq ft
High
$11.03
per sq ft
Sourced from 26 TxDOT Bid Item Average Cost Dashboard bid contracts (2024–25). These prices reflect government and commercial work where contractors are legally required to pay prevailing wages — typically 20–40% above open-shop residential rates.
DOT Verified — TxDOT Bid Item Average Cost Dashboard (2024–25)↗Cost Breakdown
| Component | Estimated Range |
|---|---|
| Ready-mix concrete (per yd³) | $130–$200 |
| Labor (forming, pouring, finishing) | $2.99–$4.35/sq ft |
| Total installed (materials + labor + site prep) | $4.59–$8.05/sq ft |
Total reflects typical homeowner pricing, estimated from 26 TxDOT Bid Item Average Cost Dashboard bid contracts (2024–25) adjusted for residential market rates. Ready-mix from national rates × local material index. Actual contractor quotes may vary.
San Antonio Market Conditions
Climate
hot dry
Labor market
14% below avg
Best pour season
October through April
Dataset rank
5 of 30 markets
- —San Antonio sits atop Texas Hill Country caliche and limestone bedrock, which provides exceptional bearing capacity and minimal soil movement risk — a meaningful advantage over Houston and Dallas where expansive clay drives up engineering requirements and costs.
- —The tradeoff is that excavation for deep footings or trenching through caliche can be slow and expensive; rock-breaking equipment adds $5–15/linear ft for footing trenches when bedrock is shallow.
- —The hot, dry climate from June through September demands aggressive moisture curing: plastic film covers, wet burlap, and curing compounds are standard practice among quality contractors, and early-morning scheduling (starting before 7 AM) is routine in summer.
- —San Antonio's construction market is large and competitive, supported partly by military and government construction activity that maintains a steady base of skilled concrete crews year-round.
- —Pricing is among the most competitive in Texas, running 5–10% below the statewide average for flatwork; the November–April window is consistently preferred for scheduling decorative work where temperature-sensitive finishing is required.
- —Unlike Austin, San Antonio has not seen the same labor cost inflation from tech-sector growth, keeping it a relatively favorable market for homeowners.
Concrete vs. Alternatives — Patio Cost Comparison
| Material (local estimates) | Installed Cost | Lifespan | Maintenance |
|---|---|---|---|
| Concrete (this market) | $4.59–$8.05/sq ft | 30–50 years | Seal every 3–5 yrs |
| Concrete pavers | $6–$16/sq ft | 30–50 years | Repoint joints every 5–10 yrs |
| Natural stone (flagstone) | $8–$24/sq ft | 50+ years | Seal periodically |
| Composite decking | $7–$18/sq ft | 25–30 years | Annual cleaning |
Alternative costs are San Antonio-market estimates derived from typical cost relationships to local concrete prices.
Hiring Tips — San Antonio Concrete Patio
- →Schedule pours for early morning to avoid peak afternoon heat — concrete placed above 90°F requires retarder additives and ice water, both of which add cost.
- →Apply curing compound immediately after strike-off — evaporative cracking is the primary surface failure mode in dry climates and happens within the first hour.
- →In neighborhoods with expansive clay soil — particularly on the south and east sides — confirm your contractor specifies a vapor barrier and perimeter drainage; skipping these on clay subgrades is the most common cause of premature slab movement in this market.
- →Verify contractor licensing and insurance before signing — lower-cost markets have a higher proportion of unlicensed operators per capita.
- →Stamped or colored concrete adds $3–8/sq ft over a plain broom finish; request it as a separate line item so quotes are comparable.
Related Guides
Estimate Your Patio Cost in San Antonio
Enter your project dimensions to get an exact concrete volume estimate. Enter your ZIP to connect with local contractors.
Estimated concrete cost (materials + delivery) · For projects over 1 cubic yard, ready-mix is typically more economical and easier to work with.
62 bags × 80lb
1.36 cubic yards + delivery
100 sq ft × $2.99–$4.35/sq ft
Based on 2024 state DOT bid data for this market. Actual contractor quotes may vary.
That's typically a professional pour. See volume ↓
4 short emails from Dave: what a fair quote should land at for your slab, the scope changes that swing it ±$500, and whether DIY is actually cheaper at your volume. Reply anytime — he'll review your real quote.
Includes 10% waste factor
Getting quotes from contractors? Use the Quote Calculator to understand every line item before you sign.
Concrete Patio Cost FAQs — San Antonio, TX
Compare patio pricing
Other concrete costs in San Antonio